<?xml version="1.0" encoding="utf-8"?>
<rss version="2.0">
  <channel>
    <title>DF创客社区 - 分享创造的喜悦 - Mind+</title>
    <link>https://static.dfrobot.com.cn/forum-165-1.html</link>
    <description>Latest 20 threads of Mind+</description>
    <copyright>Copyright(C) DF创客社区 - 分享创造的喜悦</copyright>
    <generator>Discuz! Board by Comsenz Inc.</generator>
    <lastBuildDate>Sat, 04 Apr 2026 09:33:26 +0000</lastBuildDate>
    <ttl>60</ttl>
    <image>
      <url>https://static.dfrobot.com.cn/static/image/common/logo_88_31.gif</url>
      <title>DF创客社区 - 分享创造的喜悦</title>
      <link>https://static.dfrobot.com.cn/</link>
    </image>
    <item>
      <title>按键控制继电器开和关</title>
      <link>https://static.dfrobot.com.cn/thread-399859-1-1.html</link>
      <description><![CDATA[我的继电器上面接好了水泵，水泵有外用电池，然后想用一个按键来控制继电器的开和关，但是这个程序没有问题，按下按钮后，继电器咔一下或者持续一会儿，没按一下都是这种效果，不会一直开，请问是什么问题
 ...]]></description>
      <category>Mind+</category>
      <author>45xkVGrSjU0l</author>
      <pubDate>Fri, 03 Apr 2026 07:22:28 +0000</pubDate>
    </item>
    <item>
      <title>mind+ 掌控板micropython的一些问题</title>
      <link>https://static.dfrobot.com.cn/thread-399836-1-1.html</link>
      <description><![CDATA[偶然发现掌控板的micropython的功能比Arduino c 的功能多得多，也有一些不一样，但是感觉没有用的很明白吧，原来上传的按钮没了，有个运行，点了之后预想中的功能没有实现，掌控版屏幕有一堆没看懂（等会问问豆包），两个图片分别是Arduino c和micropython，我自认为代 ...]]></description>
      <category>Mind+</category>
      <author>L3UEcRHHf1zU</author>
      <pubDate>Tue, 31 Mar 2026 10:21:43 +0000</pubDate>
    </item>
    <item>
      <title>Mind+1.8.1上传到设备，出现链接失败。</title>
      <link>https://static.dfrobot.com.cn/thread-399823-1-1.html</link>
      <description><![CDATA[以下是小黑窗显示内容：

\\Arduino\\hardware\\dfrobot\\mpython\\tools\\sdk\\include\\vfs -I D:\\360安全浏览器下载\\MindPlus_Win_V1.8.1_RC3.0\\Arduino\\hardware\\dfrobot\\mpython\\tools\\sdk\\include\\wear_levelling -I D:\\360安全浏览器下载\\MindPlus_Win_V1.8.1_RC3.0\\Ardu ...]]></description>
      <category>Mind+</category>
      <author>feiyang928</author>
      <pubDate>Mon, 30 Mar 2026 08:11:39 +0000</pubDate>
    </item>
    <item>
      <title>行空板K10 + 扩展板 + DFR0760 如何连线</title>
      <link>https://static.dfrobot.com.cn/thread-399814-1-1.html</link>
      <description><![CDATA[行空板K10 + 扩展板，如何和DFR0760相连，我连接上I2C，上传程序时，报没有连接串口，但DFR0760没有串口啊[/backcolor]]]></description>
      <category>Mind+</category>
      <author>rock318</author>
      <pubDate>Mon, 30 Mar 2026 04:04:28 +0000</pubDate>
    </item>
    <item>
      <title>无法从该位置打开多个项,尝试选择单个项</title>
      <link>https://static.dfrobot.com.cn/thread-399531-1-1.html</link>
      <description><![CDATA[模型训练，用二哈2的照相机功能，选择多张图片，出错：无法从该位置打开多个项,尝试选择单个项]]></description>
      <category>Mind+</category>
      <author>shzrzxlee</author>
      <pubDate>Fri, 27 Mar 2026 06:01:39 +0000</pubDate>
    </item>
    <item>
      <title>MIND+2.0如何读取M10内部文件</title>
      <link>https://static.dfrobot.com.cn/thread-399521-1-1.html</link>
      <description><![CDATA[刚下载了一个Mind+2.0，但是连接到M10后，找不到M10内部的文件选项，没有1.8版本中的文件系统，哪位老师能帮帮忙呢]]></description>
      <category>Mind+</category>
      <author>西瓜西</author>
      <pubDate>Thu, 26 Mar 2026 08:55:45 +0000</pubDate>
    </item>
    <item>
      <title>有人碰到过类似mind+界面的问题吗</title>
      <link>https://static.dfrobot.com.cn/thread-399518-1-1.html</link>
      <description><![CDATA[mind+界面上的栏位、字和图片都变得奇小无比，完全看不清，哪里可以调回。同时其他软件使用都是正常的，应该不是电脑显示的问题。]]></description>
      <category>Mind+</category>
      <author>sandy一脸懵</author>
      <pubDate>Thu, 26 Mar 2026 01:00:08 +0000</pubDate>
    </item>
    <item>
      <title>KNN分类器无法训练模型怎么解决</title>
      <link>https://static.dfrobot.com.cn/thread-399506-1-1.html</link>
      <description><![CDATA[一直显示开始训练，无法进入到下一步]]></description>
      <category>Mind+</category>
      <author>foHYgW5Tg0XY</author>
      <pubDate>Wed, 25 Mar 2026 07:07:50 +0000</pubDate>
    </item>
    <item>
      <title>为什么条件判断总有问题？</title>
      <link>https://static.dfrobot.com.cn/thread-399505-1-1.html</link>
      <description><![CDATA[想做一个效果，点击鼠标，出现花朵，但是不论怎么加条件，碰到黑色，或者碰到树枝，花朵仍然会显示在程序外。
求助]]></description>
      <category>Mind+</category>
      <author>Lily_</author>
      <pubDate>Wed, 25 Mar 2026 02:40:45 +0000</pubDate>
    </item>
    <item>
      <title>物联网模块实时模式可收到消息，上传模式收不到？</title>
      <link>https://static.dfrobot.com.cn/thread-399491-1-1.html</link>
      <description><![CDATA[求助大佬，我用obloq模块，为什么实时模式可收到消息，而上传模式收不到，是我的程序块有问题吗？
上传模式
实时模式]]></description>
      <category>Mind+</category>
      <author>zsc990338</author>
      <pubDate>Mon, 23 Mar 2026 07:32:47 +0000</pubDate>
    </item>
    <item>
      <title>mind+掌控板驱动装不上如何解决</title>
      <link>https://static.dfrobot.com.cn/thread-399466-1-1.html</link>
      <description><![CDATA[玩掌控板将近10年了，在一台重装过的电脑上装驱动突然碰到这个问题，求助大佬。mind+ 1.8版本的 ，无法连接掌控板，设备管理显示感叹号，一键安装驱动显示如下两个驱动没安装成功，求助怎么解决？





 ...]]></description>
      <category>Mind+</category>
      <author>小小贝你好</author>
      <pubDate>Thu, 19 Mar 2026 01:04:28 +0000</pubDate>
    </item>
    <item>
      <title>mind+连接掌控板3.0失败咋回事</title>
      <link>https://static.dfrobot.com.cn/thread-399463-1-1.html</link>
      <description><![CDATA[mind+连接掌控板3.0失败咋回事]]></description>
      <category>Mind+</category>
      <author>小眼哥</author>
      <pubDate>Wed, 18 Mar 2026 14:06:23 +0000</pubDate>
    </item>
    <item>
      <title>求求各位大神帮我看看是什么问题？</title>
      <link>https://static.dfrobot.com.cn/thread-399453-1-1.html</link>
      <description><![CDATA[我使用的是mind+在线版的实时模式，但是打开角色库，里面的卡片都是白色的，换过电脑、换过网络、换过浏览器、清过缓存，都不行，不知道问题出在哪了，要如何解决，求广大网友帮一下忙，非常感谢！
 ...]]></description>
      <category>Mind+</category>
      <author>重力领域</author>
      <pubDate>Tue, 17 Mar 2026 10:22:13 +0000</pubDate>
    </item>
    <item>
      <title>用mind+做的课堂小游戏（仅内置一个）</title>
      <link>https://static.dfrobot.com.cn/thread-399447-1-1.html</link>
      <description><![CDATA[用mind+做的课堂小游戏，没有技术含量，不喜勿喷。
游戏.rar]]></description>
      <category>Mind+</category>
      <author>xmvcIGMvjr79</author>
      <pubDate>Mon, 16 Mar 2026 13:24:29 +0000</pubDate>
    </item>
    <item>
      <title>大家没有用遇到ST7789V2不能显示怎么办</title>
      <link>https://static.dfrobot.com.cn/thread-399423-1-1.html</link>
      <description><![CDATA[大家没有用遇到ST7789V2不能显示怎么办，我的Maixduino查询了可以使用ST7789的屏，我使用了ST7789V2就是不显示，怎么解决]]></description>
      <category>Mind+</category>
      <author>hglltm</author>
      <pubDate>Fri, 13 Mar 2026 00:56:30 +0000</pubDate>
    </item>
    <item>
      <title>Mind+ V2.0.5 bug报告，望修复</title>
      <link>https://static.dfrobot.com.cn/thread-399421-1-1.html</link>
      <description><![CDATA[使用过程中发现这些bug：
# 1、标题栏bug

在大多数时候，多个窗口处于屏幕上时，点击Mind+标题栏想切换到该软件使用时，软件莫名最小化，再也无法开启

# 2、编译bug
在上传模式下，编译程序时，出现库不存在的情况，但是对应目录下有该文件。所有路径均为英文。且每次 ...]]></description>
      <category>Mind+</category>
      <author>anthonzhai</author>
      <pubDate>Thu, 12 Mar 2026 13:43:41 +0000</pubDate>
    </item>
    <item>
      <title>我的图像识别为什么识别结果错的。</title>
      <link>https://static.dfrobot.com.cn/thread-399420-1-1.html</link>
      <description><![CDATA[想做一个红绿灯识别的模块，用了两个颜色的小方块做训练，模型训练完后，识别错的。]]></description>
      <category>Mind+</category>
      <author>Lily_</author>
      <pubDate>Thu, 12 Mar 2026 13:09:49 +0000</pubDate>
    </item>
    <item>
      <title>请问mind+2.0的程序怎么导出成网页文件</title>
      <link>https://static.dfrobot.com.cn/thread-399419-1-1.html</link>
      <description><![CDATA[之前的在线转化工具有问题，导出来乱码，2.0没有另存为sb3的选项。]]></description>
      <category>Mind+</category>
      <author>Lily_</author>
      <pubDate>Thu, 12 Mar 2026 12:09:35 +0000</pubDate>
    </item>
    <item>
      <title>请问mind+2.0的版本怎么把文件导出网页格式？</title>
      <link>https://static.dfrobot.com.cn/thread-399418-1-1.html</link>
      <description><![CDATA[2.0没有另存为sp的选项，该怎么导出网页格式？直接上传用原来的也不对。我在程序中调用了摄像头，监测红绿灯。]]></description>
      <category>Mind+</category>
      <author>Lily_</author>
      <pubDate>Thu, 12 Mar 2026 11:57:57 +0000</pubDate>
    </item>
    <item>
      <title>一个踢足球程序</title>
      <link>https://static.dfrobot.com.cn/thread-399408-1-1.html</link>
      <description><![CDATA[WERTYYHBVCWEDSCVBNSD]]></description>
      <category>Mind+</category>
      <author>黄某某</author>
      <pubDate>Wed, 11 Mar 2026 11:36:29 +0000</pubDate>
    </item>
  </channel>
</rss>